Filter
Top Products
Installation
Document 900.0856 Rev B 31
02/08
Connecting the Power Cord
Figure 2-17 Power Cord Connector
Connect the AC power cord to the DVR and then to a wall outlet.
WARNING! ROUTE POWER CORDS SO THAT THEY ARE NOT A
TRIPPING HAZARD. MAKE CERTAIN THE POWER CORD
WILL NOT BE PINCHED OR ABRADED BY FURNITURE.
DO NOT INSTALL POWER CORDS UNDER RUGS OR
CARPET.
THE POWER CORD HAS A GROUNDING PIN. IF YOUR
POWER OUTLET DOES NOT HAVE A GROUNDING PIN
RECEPTACLE, DO NOT MODIFY THE PLUG.
DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO
MANY DEVICES IN TO ONE CIRCUIT.
Caution In noisy electrical environments, use an Uninterruptible Power
Supply (UPS) to minimize the potential of damage to the DVR
from undesired power related hazards. Connect the UPS between
the DVR and the AC voltage supply.
Your DVR is now ready to operate. Refer to Chapter 3, Configuration and Chapter 4,
Operation to use the DVR.