Filter
Top Products
Configuration
Document 900.0856 Rev B 49
02/08
4. Highlighting a User Name and pressing allows you to add or change the
password assigned to that user. You can also change the group to which the user
is assigned.
5. The column can be used to delete a User Name or an entire Group. If the
is grayed out, that Group or User cannot be deleted. Highlight the and press
. You will be asked to confirm that you want to delete the User or Group. To
delete the User currently logged into the DVR on a local system or a PC running
RAS, log the user out of the system first and then delete the user.
6. To add a Group, highlight the + Group… box and press . A virtual keyboard
appears allowing you to enter the Group name. You can use up to 15 characters
including spaces in the group name. Enter the name and assign authority levels to
the new group.
Figure 3-19 New Group Setup Screen
7. Highlighting the Authority box and pressing will toggle between all authority
levels being turned On and Off. Highlighting the individual authority level boxes
and pressing will toggle between that authority level being turned On and Off.
The authority levels that can be turned On and Off are:
• Shutdown — The user can shut the system down on a local system.
• Upgrade — The user can upgrade the software on a local system or a PC
running RAS.
• System Time Change — The user can change the system date and time on
a local system or a PC running RAS.
• Data Clear — The user can clear all video data or format disks on a local
system or a PC running RAS.
• Setup — The user without Setup authority cannot establish any system
settings excluding system shutdown and logout on a local system or a PC
running RAS.
• Color Control — The user can control brightness, contrast, hue and
saturation for cameras on a local system or a PC running RAS.
• PTZ Control — The user can control the PTZ camera on a local system or a
PC running RAS.
• Alarm-Out Control — The user can reset the DVR’s outputs including the
internal buzzer during an alarm by pressing ALARM on a local system or
alarm-out control button on a PC running RAS.
• Covert Camera View — The user can view video from cameras set as Covert
while in the Live Monitoring or Search mode on a local system or a PC
running RAS.