Filter
Top Products
14. Appendix
GB72
User’s Manual
14.7. Using the Universal Remote Control
1. Select the mode (TV, PVR, DVD, AUDIO) you want to set by pressing the corresponding button on the
remote control. The button will blink once.
2. Keep pressing the button for 3 seconds until the button lights on.
3. Enter the 4-digit code. Every time a number is entered, the button will blink. When the fourth digit is
entered, the button will blink twice.
4. If a valid 4-digit code is entered, the product will power o.
5. Press the OK button and the mode button will blink three times. The setup is complete.
6. If the product does not power o, repeat the instruction from 3 to 5.
Note:
• When no code is entered for one minute the universal setting mode will switch to normal mode.
• Try several setting codes and select the code that has the
most functions.
Remote Control Function List
The keys on the remote control function as in the list below.
Note:
Some keys may not function depending on the product.
KeyTV DVD AUDIO
MUTE MUTE MUTE
STANDBY POWER POWER
PVR PVR --
TV TV - -
DVDDVD --
AUDIO AUDIO - -
11DIGIT 1 1
22DIGIT 2 2
33DIGIT 3 3
44DIGIT 4 4
55DIGIT 5 5
66DIGIT 6 6
77DIGIT 7 7
88DIGIT 8 8
99DIGIT 9 9
00DIGIT 0,11 0
LIST LIST - LIST
MENU MENU MENU MENU