Filter
Top Products
English-14
To view the television channels correctly, a signal must be received by the
broadcasting provider.
1 Connect the RF coaxial cable from an aerial or a cable TV to the RF jack on
the rear of the TV.
2 Turn on the TV, and then press the TV/AV button to select Digital TV or
Analog TV.
Notes:
1.
To receive an optimal signal, it is recommended that you use a 75 ohm IEC-
type coaxial cable.
2.
For proper reception of signals, an external antenna is required. For best
reception, an outdoor antenna is recommended.
3.
To improve the picture quality in a poor signal area, please purchase a signal
DPSOL¿HUDQGLQVWDOOSURSHUO\
Connecting to an Aerial or a Cable TV
Chapter 2 >> Connecting Your TV
or
Cable TV
COMPONENT