> System
Language
Time Setting
Change Password
CI
PC
DTV Setup
Panel Off
VFD Clock
Default Setting
English
Disable
Disable
Move
Enter
>> Time Setting
Date
Local Time
GMT Offset
Snooze
Power On Time
Power Off Time
Auto Power Off
19.03.2007
10 : 00
GMT+00 : 00
Off
Off
-- : -- TV
Off
-- : --
Off
Move
Select
>> Time Setting
Date
Local Time
GMT Offset
Snooze
Power On Time
Power Off Time
Auto Power Off
19.03.2007
10 : 00
GMT+00 : 00
Off
Off
-- : -- TV
Off
-- : --
Off
Move
Select
>> Time Setting
Date
Local Time
GMT Offset
Snooze
Power On Time
Power Off Time
Auto Power Off
19.03.2007
10 : 00
GMT+00 : 00
Off
Off
-- : -- TV
Off
-- : --
Off
Move
Select
English-45
You can set the current time. If you want to set time for automatically turning
RQRIIWKHSRZHU\RXPXVWVHWWKHORFDOWLPH¿UVW
Setting the Current Time
1 Press the MENU button.
2 Select SystemXVLQJWKHŸźEXWWRQDQGSUHVVWKHOKRUŹEXWWRQ
3 Select Time SettingXVLQJWKHŸźEXWWRQDQGSUHVVWKHOKRUŹEXWWRQ
4 Select DateXVLQJWKHŸźEXWWRQDQGHQWHUGD\PRQWK\HDUXVLQJWKH
NUMBER(0~9) buttons.
5 Select Local TimeXVLQJWKHŸźEXWWRQDQGHQWHUKRXUPLQXWHXVLQJWKH
NUMBER(0~9) buttons.
Note: Your TV automatically sets and updates the time over the air when you
successfully search digital terrestrial channels. Then Date and Local Time
menu will be disabled. You must set the GMT Off set value in System > Time
Setting > GMT Offset menu.
Using the TV Timer Function
You can schedule time for automatically turning on/off the power so that your TV
ZLOODXWRPDWLFDOO\EHWXUQHGRQDQGRIIDWVSHFL¿FWLPH\RXKDYHVFKHGXOHG
6 To set time for turning on the power, select Power On TimeXVLQJWKHŸź
EXWWRQDQGSUHVVWKHŻŹEXWWRQWRVHOHFWOn.
7 Power On Time is enabled, enter hour/minute using the NUMBER(0~9)
buttons. And select your desired service between TV or Radio using the
ŻŹEXWWRQ$WWKHSUHVHWWLPHWKH79ZLOODXWRPDWLFDOO\EHWXUQHGRQDQG
display the preset service.
8 To switch into the standby mode momentarily when the TV is turned on
automatically at the preset time, select SnoozeXVLQJWKHŸźEXWWRQDQG
SUHVVWKHŻŹEXWWRQWRVHOHFW On. Then, within 10 minutes after the TV
is turned on automatically at the preset time, if you press the STANDBY
button, the TV is switched to the standby mode and will be worked again
after 5 minutes.
9 To set time for turning off the power, select Power Off TimeXVLQJWKHŸź
EXWWRQDQGSUHVVWKHŻŹEXWWRQWRVHOHFWOn.
10 Power Off Time is enabled, enter hour/minute using the NUMBER(0~9)
buttons.
Setting the Auto Power Off
In case there is no signal, it is possible have your TV automatically turned off to
reduce power consumption.
11 Select Auto Power OffXVLQJWKHŸźEXWWRQDQGSUHVVWKHŻŹEXWWRQWR
select On. The TV will automatically be turned off if there is no signal.
Setting the Time Information
Chapter 9 >> Setting the System