Humax LGB-19DRT Flat Panel Television User Manual


  Open as PDF
of 76
 
English-73
(12) Cannot record progammes.
- Make sure that the HDD is connected correctly.
- The hard disk is full. Delete unnecessary programmes and make space for new recording.
- Check if recording is overlapped with another channel. Stop the current recording or wait until
WKHUHFRUGLQJLV¿QLVKHG
(13) Cannot operate the TSR (Time Shifted Recording)
- Make sure that the HDD is connected correctly.
 7KH765PD\QRWEHDYDLODEOHGXULQJWKHUHFRUGLQJ:DLWXQWLOWKHUHFRUGLQJLV¿QLVKHG
- Delete unnecessary programmes and make space for new recording.
(14) Cannot playback.
- Make sure that the HDD is connected correctly.
- The signal during the recording may be weak or the hard disk too full.
(15) Cannot change channel while recording.
- Certain channels may not be changed due to restriction of the tuner type.
Troubleshooting
Error Message
Error message Possible causes What to do
No signal
- The aerial is not pointing properly.
- The AV device is not connected
properly.
- Adjust aerial.
- Check the cable from the aerial. If
you cannot resolve the problem you
may need to have your aerial and
installation tested by a professional.
- Set the AV device correctly.
- Check the cable from the AV device.
Will not accept
- The key(button) is not supported
for this product.
Invalid Mode
- The resolution of connected PC is
not set properly.
- Check the optimal resolution
settings. You may need to download
a new video driver.
No Subtitle Data
- The channel has not the subtitle
data.
 &RQ¿UPLIWKHFKDQQHOLVSURYLGHG
the subtitle data.
The channel is scrambled
or not available.
- The channel has signal, but no
audio or video.
- The channel is deleted by the
broadcasting company.
- The channel is for data
broadcasting. (Cannot watch the
channel in usual way.)
 &RQ¿UPLIWKHFKDQQHOLVFXUUHQWO\
on air.
The channel is scrambled.
- This digital terrestrial receiver
does not support the service
that enables to descramble the
scrambled channels.
The audio is not available.
- The channel has a video signal,
but no audio is provided.
- Press the audio buttons on your
UHPRWHFRQWUROWRFRQ¿UPWKDWWKH
channel has audio options.
CI-Module is not installed.
/ Invalid CI-Module
- CI-Module is not installed.
- CI-Module is not properly inserted.
- CI-Module is broken.
- Install proper CI-Module.
- Pull out the CI-Module and plug it in.
- Replace CI-Module.
 previous next