Filter
Top Products
**
5.1 Picture-in-Picture (PIP) Screen
If you press the PIP button on the remote control while watching TV, you
can watch 2 channels at the same time. The Audio from the Main screen will be
outputted.
Each time you press the PIP
button, the PIP screen moves in order of 1:6
-> 1:1-> Normal, as displayed in the following figure.
1:6 PIP screen
**
Normal screen
**
1:1 PIP screen
Note:
• The PIP screen is available only when you are watching TV channels. You cannot use the PIP function on Radio
channels.
• The PIP screen is not available while recording.
• Only one scrambled (Pay TV) channel can be used with the PIP function.
• The teletext (MHEG) is only available on the main screen.
1. Swapping the PIP screen.
This function is available either 1:6 PIP or 1:1 PIP.
Press the SWAP PIP button on the remote control to swap the main
screen for the PIP screen. Press the CH-/CH+
button to change the
main screen channel.
Note: You cannot use the SWAP PIP function in the following cases:
1. When you are watching radio channel.
2. When the screen displays the channel list, soundtrack and detail
information.
5. PIP and Time Shifted Recording
GB 25