Filter
Top Products
**
2. If updating software from Menu
1. Press the MENU button.
2. Select Installation using the
button and press the OK
or button.
3. Enter Password using the NUMERICAL (0-9) buttons.
4. Select Software Update using the
button and press the
OK
or button.
3. If new version of software is detected during watching a programme
Press the OK button to start updating
4. If using Automatic Update
You can set the product to find HUMAX software update site and update software automatically.
1. Select Automatic Update from Software Update screen using the
button and press the OK or
button.
2. Automatically search for new software. Select Cancel and press the OK
button to finish Search.
3. When detecting update software, the following result is displayed. If new software is not found by Automatic
update, use Manual Update.
4. Select Yes and press the OK
button to start updating.
Select No and press the OK
button to return to the previous menu without updating.
5. When completing the software update, the product is automatically powered off and on again.
GB 67