Humax PVR-9200T DVR User Manual


 
**
10.3 Default Setting
Default Setting restores the product to the default settings.
Warning: Please note that once you perform Default Setting, all data such as Channel List and User Configured
data are deleted, no information on the HDD will be lost.
**
To perform Factory Default:
1. Press the MENU
button.
2. Select Installation using the
button and press the OK or button.
3. Enter Password using the NUMERICAL (0-9) button.
4. Select Default Setting using the
button, press the OK or button.
5. Select Yes and press the OK
button to restore all setting to Factory Default.
Select No and press the OK
or BACK button to return to the previous menu.
6. Confirm again to start loading default setting. Enter Password using the NUMERICAL (0-9) button to perform
restoring.
7. When completing the default setting, press the OK
button to automatically run the Installation Wizard.
For detailed information about Installation Wizard, refer to 3. Installation Wizard.
Note: The default password is 0000.
10. Installation
GB 64