Humax PVR-9200T DVR User Manual


 
**
15.2 Error Message
Error message Possible causes What to do
No or bad signal The aerial is not pointing properly. Adjust aerial.
Check the cable from the aerial.If you cannot
resolve the problem you may need to have
your aerial and installation tested by a
professional.
The channel is
scrambled or not
available.
The channel has signal, but no audio or video.
The channel is deleted by broadcasting
company.
Check if the channel is currently on air.
The channel is for data broadcasting. Cannot watch the channel in usual way.
The audio is not
available.
The channel has signal, but no Audio. Press the Audio button to check if the channel
has Audio.
CI module is not
installed.
CI module is not installed.
CI module is not properly inserted.
CI module is broken.
Install proper CI module.
Pull out the CI module and plug it in
Replace CI module.
Invalid CI module CI model is not correct.
CI module is not properly inserted.
CI module is broken.
Install proper CI module.
Pull out the CI module and plug it in again.
Replace CI module.
GB 77