Insignia NS-26L450A11 Flat Panel Television User Manual


 
14
NS-26L450A11/NS-32L450A11 26"/32" LCD, 1080p
www.insigniaproducts.com
Making connections
Connecting power
To connect the power:
Connect the AC power cord to the AC connector
on the back of your TV, then plug the other end
into a power outlet.
Connecting an antenna or cable TV without a
cable box
To connect an antenna or cable TV without a
cable box:
Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the back of your TV and to
the antenna or cable TV wall jack.
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than
one connection type. To get the best video, you
should use the best connection type available.
Cautions
Check the jacks for position and type before
making any connections.
Loose connections can result in image or color
problems. Make sure that all connections are
tight and secure.
The external audio/video equipment shown
may be different from your equipment. If you
have questions, refer to the documentation that
came with your equipment.
Always unplug the power cord when
connecting external equipment.
Notes
Your TV should only be operated from the
power source indicated on the label.
Always unplug the AC power cord from the
power outlet when you will not be using your
TV for an extended period of time.
Notes
Use a 75 ohm cable to eliminate interference
and noise from radio waves.
Do not bundle the 75 ohm cable with the power
cord or other cables.
If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
Connection type Video quality
HDMI Best
Component Better than S-Video, composite, or coaxial
S-Video Better than composite or coaxial
Composite Better than coaxial
Coaxial Good
Back of TV
Antenna or cable TV
wall jack.