Filter
Top Products
51
Insignia 32" LCD TV/Blu-ray Combo, 1080p
www.insigniaproducts.com
Adjusting the digital output mode
To adjust the digital audio output mode:
1 Press ENTER. The Settings menu opens.
2 Press or to highlight Audio. The Audio
menu opens.
3 Press or ENTER to access the audio options.
4 Press or to highlight Digital Output, then
press ENTER.
5 Press or to highlight the digital output
mode you want, then press ENTER. You can
select:
• PCM—Sends mixed digital audio over the
OPTICAL connection in two-channel PCM
format.
• Bitstream—Sends the original bitstream from
the disc over the OPTICAL connection using
legacy audio formats. Blu-ray Disc audio is
limited to the soundtrack for main movie and
does not send PiP audio or audio effects.
• Bitstream mixed—Blu-ray Disc audio streams
are mixed and encoded into a single
bitstream. Use this option if you are using an
SPDIF 5.1CH receiver and you want to enjoy
mixed Blu-ray Disc audio in surround sound.
6 Press to go to the previous menu.
Turning dynamic range control on or off
Dynamic range control only works when your
TV/Blu-ray combo detects a Dolby Digital signal.
To turn dynamic range control on or off:
1 Press ENTER. The Settings menu opens.
2 Press or to highlight Audio. The Audio
menu opens.
3 Press or ENTER to access the audio options.
4 Press or to highlight Dynamic Range
Control, then press ENTER.
5 Press or to highlight an option, then press
ENTER. You can select:
• On—Select this option if you play movies at
low volume or if you have small speakers. Your
TV/Blu-ray combo uses compression to make
low-audio content easier to hear and prevent
high-audio content from getting too loud.
• Off—Select this option if you do not want to
use the Dynamic Range Control feature. The
dynamic range control gain value is ignored,
and the audio program is reproduced with full
dynamic range.
• Auto—Select this option to listen to movies at
the dynamic range they were recorded in.
6 Press to go to the previous menu.
Turning parental controls on or off
To turn parental control on or off:
1 Press ENTER. The Settings menu opens.
2 Press or to highlight Parental. The Parental
menu opens.
3 Press or ENTER. The password screen opens.
4 Enter your password. The default password is
0000.
5 Press or to highlight Parental Control, then
press ENTER.
6 Press or to highlight On or Off, then press
ENTER. If you select On, you will be prompted
to enter the parental control password before
being allowed to change the other parental
control options. If you select Off, you can
change the options without entering a
password.
7 Press to go to the previous menu.
Note
• When Bitstream is selected, your TV/Blu-ray
combo cannot output secondary audio.
• If a disc has PiP audio, you can select it by
pressing AUDIO.
Settings
Parental
System
Language
Display
Network
Audio
PCM Downsampling 48 KHz
Audio
PCM
Off
Digital Output
Dynamic Range Control
Settings
Parental
System
Language
Display
Network
Audio
PCM Downsampling 48 KHz
Audio
PCM
Off
Digital Output
Dynamic Range Control
Settings
Network
Display
System
Language
Audio
Parental
Parental Country USA
Parental
On
8 [Adult]
Parental Control
Parental Level
Parental Password