Filter
Top Products
56
NS-32LB451A11 Insignia 32" LCD TV/Blu-ray Combo, 1080p
www.insigniaproducts.com
• Dynamic—Uses DHCP to automatically
obtain an IP address.
7 Press or to highlight Apply, then press
ENTER. To cancel manual setup, select Cancel,
then press ENTER.
8 Press to go to the previous menu.
Understanding the wireless network list
When you select Network List in the wireless
network setup, a menu appears with a list of the
available wireless networks.
Connecting to an unencrypted wireless
network
To connect to an unencryped wireless network:
1 Press ENTER. The Settings menu opens.
2 Press or to highlight Network, then press
ENTER. The Network menu opens.
3 Press or to highlight Wireless, then press
ENTER. The list of wireless options opens.
Connected
When your TV/Blu-ray combo is turned on, it
will connect to the wireless network
displaying this symbol. Typically, this is the
last wireless network connected before
powering down.
*
Indicates that the TV/Blu-ray combo is
currently connected to this network.
Saved
The wireless network properties (if any) have
been saved in your TV/Blu-ray combo’s
memory.
Wireless security
The wireless network data is not encrypted.
The wireless network data is encrypted. A
“security key” must be entered so your
TV/Blu-ray combo can share data over the
network.
The wireless network data is encrypted. The
encryption scheme is not supported by the
TV/Blu-ray combo.
Wireless protocol
The wireless network supports 802.11b.
The wireless network supports 802.11g.
The wireless network supports 802.11n
(draft; not all 802.11n routers may be
compatible with your TV/Blu-ray combo).
Signal strength
Strong
Good
Medium
Weak
No signal
Settings
Audio
Language
Display
System
Parental
Network
Wired
Wireless
Network Test
Settings
Audio
Language
Display
System
Parental
Network
WiFi Protected Setup (WPS)
IP Settings
Manual
Network List