Filter
Top Products
6
NS-42E470A13 Insignia 42" 1080p LED TV
www.insigniaproducts.com
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the four screws that secure the stand
column to the TV screen, then remove the
stand.
3 Secure the stand cover to the back of the TV
screen using the four screws you just removed.
4 Attach the wall-mount bracket to your TV using
the mounting holes on the back of your TV. See
the instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
“Miscellaneous
” on page 53.)
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take
type M6 screws.
15.68 in. (400 mm)
15.68 in. (400 mm)
Wall-mount brackets
NS-42E470A13_11-1346_MAN_V1_ENG.book Page 6 Friday, April 20, 2012 4:35 PM