Filter
Top Products
31
Insignia 42" 1080p LED TV
www.insigniaproducts.com
6 Press S or T to highlight an option, then press
ENTER or OK/ENTER to access the option. You
can select:
• Phase—Minimizes horizontal distortion.
• Reset Component Settings—Resets all
component video settings to factory mode.
7 Press
W or X to adjust the option, or press S or
T to select a setting.
8 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Adjusting the sound
Adjusting sound settings
To adjust sound settings:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight AUDIO, then press T or
ENTER or OK/ENTER. The Audio menu opens.
3 Press
S or T to highlight an option, then press
ENTER or OK/ENTER to access the option. You
can select:
• Sound Mode—Selects the sound mode. You
can select:
• Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
• Theater—Enhances treble and bass for a
rich sound experience. This setting is good
for watching DVDs, Blu-ray discs, and
HDTV.
• Music—Preserves the original sound. This
setting is good for listening to music.
• News—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
• Custom—Lets you manually adjust sound
settings.
• Balance—Adjusts the balance between the
left and right audio channels.
• Advanced Audio—Opens the
Audio · Advanced Audio menu where you can
adjust additional audio options.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• TV Speakers—Selects where to play TV
audio. You can select On (default setting)
to play audio through TV speakers, or
select Off to play audio through the
speakers on an external audio system.
• Digital Audio/SPDIF—Sends digital audio
to an external audio system. You can select
PCM (to output audio in 2-channel stereo),
or RAW (to pass through the original
digital audio sound).
• MTS/SAP—(Analog channels only) Selects
the audio mode. You can select:
• MONO—Select this option if there is
noise or static on weak stereo
broadcasts.
• STEREO—Select this option for
programs broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• Reset Audio Settings—Reset all audio
settings to factory defaults.
4 Press
W or X to adjust the option, or press S or
T to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
MOVE
OK
ENTER
MENU
EXIT
EXIT
PREVIOUS
SELECT
Adjust settings to affect picture quality
PICTURE
CHANNELS
SETTINGS
PHOTOS
AUDIO
Picture
Picture Mode
Brightness
Contrast
Color
Advanced Video
Reset Picture Settings
Energy Savings
50
46
78
MOVE
OK
ENTER
MENU
EXIT
EXIT
PREVIOUS
SELECT
Adjust settings to affect sound quality
Audio
Sound Mode
Balance
Advanced Audio
Reset Audio Settings
Standard
0
PICTURE
CHANNELS
SETTINGS
PHOTOS
AUDIO
Note
You can also press AUDIO one or more time select
the Sound Mode. We did not list the modes in this
note because they are list just above in the list.
Note
You can also press MTS/SAP (remote
control model NS-RC05A-13) or SAP
(remote control model NS-RC01G-09)
one or more times to select the audio
mode.
MOVE
OK
ENTER
MENU
EXIT
EXIT
PREVIOUS
SELECT
Adjust low frequency sound
Audio
Treble
TV Speakers
Digital Audio/SPDIF
MTS/SAP
Audio Language
On
PCM
Stereo
32
Advanced Audio
Bass
32
Picture
Channels
Settings
PhotosAudio
NS-42E470A13_11-1346_MAN_V1_ENG.book Page 31 Friday, April 20, 2012 4:35 PM