Filter
Top Products
8
Insignia NS-1UCDVD DVD Player
www.insignia-products.com
• For Video and S-VIDEO connections,
resolution must be set to 480i or 480p;
however, VIDEO OUT is always at 480i
standard resolution.
• For 720p and 1080i resolution on the
component video out, only non-copy
protected discs can be played back.If the
disc is copy protected, it will be displayed
at the 480p resolution without HDMI cable
connection. With HDMI cable connection,
the picture may not be display properly.
Connecting your player to optional audio
equipment
You can connect your player to an external
source to enjoy high quality stereo sound from
your DVD player.
To connect your player to optional audio
equipment:
1 Amplifier equipped with 2-channel analog
stereo or Dolby Pro Logic ll / Pro Logic:
Use audio cables (A) to connect the left and
right AUDIO OUT jacks on the DVD player to
the audio left and right IN jacks on your
amplifier, receiver, or stereo system.
2 Amplifier equipped with 2-channel digital
stereo (PCM) or audio/video receiver
equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS):
Use an optional OPTICAL O or COAXIAL X
(A) digital audio cable to connect one of the
DVD player’s OPTICAL O or COAXIAL X
DIGITAL AUDIO OUT jacks to the
corresponding OPTICAL O or COAXIAL X
jack on your amplifier.
3 Digital multi-channel sound:
A digital multi-channel connection using a
multi-channel audio/video receiver that
supports one or more of the audio formats
supported by your DVD player such as
MPEG 2, Dolby Digital and DTS, provides the
best sound quality. Check the owner’s
manual for your receiver and the logos on the
front of the receiver to verify the type of
system you are using.
Using your DVD player
Using your remote control
Accessing DVD player features using your remote
control buttons
All features of your DVD player can be accessed
using the remote control. Some functions work
with all types of discs, while some features work
only with certain types of discs.
To access DVD features:
1 Press the button that corresponds to the
operation desired.
2 Press the or button to select a menu.
3 Press to enter a sub menu or press to
return to the previous menu.
4 Press the or button to select a sub
menu if necessary, then press ENTER to
confirm your selection.
The following table specifies the feature
operations and the type of discs required for
the feature to work.
Note
This DVD player has been manufactured under
license from Dolby Laboratories. “Dolby”, “Pro
Logic” and the double-D symbol are trademarks of
Dolby Laboratories. DTS and DTS Digital Out are
trademarks of Digital Theater Systems, Inc.
Rear of DVD player
Amplifier (Receiver)
Note
If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver produces a strong, distorted sound or no
sound at all.
Six Channel Digital Surround Sound via a digital
connection can only be obtained if your receiver is
equipped with a digital multi-channel decoder.
Button Operation Type of disc
OPEN/CLOSE Opens or closes the disc tray. All
PAUSE/STEP During playback, press to
pause play.
Press repeatedly to play
frame-by-frame.
All
SKIP
During playback, press
to go to the next chapter/track
or press to return to the
beginning of the currently
playing chapter/track.
Press briefly twice to step back
to the previous chapter/track.
DVD
SCAN During playback, press
repeatedly to select the desired
scan speed.
DVD discs have four scan
speeds.
MP3 and audio CD discs have
three scan speeds.
DVD
Audio CD
(ACD)
MP3