Insignia NS-BRDVD4-CA Blu-ray Player User Manual


 
33
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
Turning film mode on or off
Movies are recorded on film at a rate of 24 pictures (frames) per second.
Many of the movies on Blu-ray Discs are placed on the discs at this frame
rate. If your TV supports 24 frames per second, but you would prefer
viewing the video at a higher frame rate, you should turn off Film Mode.
To turn film mode on or off:
1 Press ENTER. The Settings menu opens.
2 Press or to select Display, then press ENTER. The Display menu
opens.
3 Press or to select Film Mode (1080p24), then press ENTER.
4 Press or to select Auto or Off. Off selects a 60 frames/second
output format. Auto selects an output format of 24p automatically, if
it's supported.
5 Press to go to the previous menu.
Selecting Deep Color
If Deep Color is set to Auto, and the player is connected to TV via HDMI
cable, the player will first try to set the color depth to 36 bits. If the TV does
not support 36 bits, it will try to set the color depth to 30 bits. If the TV
does not support 30 bits, the player will set the color depth to
24 bits. If Deep Color is set to Off, the player will set the color depth to 24
bits.
Select 24 bits, 30 bits, or 36 bits.
Note
The player is capable of sending “deep” (up to 36-bit) color over
HDMI, if the TV supports it. This expands the colors displayed
from millions to billions, which is much more vivid than the
previous.
NS-BRDVD4-BRDVD4-CA_10-0919_MAN_V5.fm Page 33 Friday, August 13, 2010 11:33 AM