Insignia NS-BRDVD4-CA Blu-ray Player User Manual


 
53
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
Power
Operation
Problem Solution
No power Make sure that the power cord is plugged into a power outlet and that
the outlet is supplying power.
The player switches to standby mode After a period of inactivity, your player switches to standby mode
automatically. This is a power saving feature.
If your player switches to standby mode unexpectedly, a safety device
may have been activated. Press STANDBY/ON on the front of your
player.
Problem Solution
Remote control does not work
Make sure that you are pointing the remote control at the
remote control sensor on the front of your player.
Make sure that there are no obstructions between the remote
control and the remote control sensor on the front of your
player.
Make sure that there is no colored glass between the remote
control and the remote control sensor on the front of your
player. Colored glass, such as the glass door of an
entertainment center, can interfere with signal reception.
Make sure that the remote control sensor is not exposed to
direct sunlight or bright light. These can interfere with signal
reception.
Replace the batteries.
Some or all functions do not work
Some functions are not allowed by the disc, for example,
fast-forwarding through the warning information at the
beginning of the disc.
Condensation may have formed inside your player. Turn off your
player and wait one to two hours for the condensation to
evaporate.
Reset your player. For instructions, see “Resetting your player”
on page 52.
Playback fails to start or starts then
stops even when (play/pause) is
pressed
Make sure that the disc is inserted face up in the disc tray.
Make sure that the disc is not dirty. For instructions, see
“Cleaning discs” on page 51.
The disc may be blank or incompatible with your player. Try
another disc.
Start up is slow and audio and video
output takes a long time
If power has been interrupted or the power cord has just been
connected, startup is slow. This is not a defect.
If your player is connected to the TV with an HDMI cable,
startup is slow. This is not a defect.
NS-BRDVD4-BRDVD4-CA_10-0919_MAN_V5.fm Page 53 Friday, August 13, 2010 11:33 AM