8
Insignia NS-PDP32-09 32" PDP TV
www.insignia-products.com
Connecting an outside antenna
Antenna cables come in two types: 75 ohm and
300 ohm.
• If your antenna cable has a 75 ohm
connector, connect the cable to the coaxial
AIR/CABLE IN jack on the back of your TV.
• If your antenna cable has a 300 ohm
connector, connect the cable to a
300-75 ohm adapter (not included), connect
the adapter to a 75 ohm cable, then connect
the other end of the 75 ohm connector to the
coaxial jack on the back of your TV.
Connecting cable TV
Your TV has a 75 ohm AIR/CABLE IN jack for
connecting cable TV.
Some cable TV providers scramble the signals
for “premium” (pay) channels. To view these
channels, you need a converter/descrambler
box.
If you do not have a converter/descrambler box,
you can connect your cable TV directly to your
TV. If you have a converter/descrambler box, you
can connect your cable TV using an RF switch
(not supplied). For more information about
connecting a converter/descrambler box, contact
your cable TV provider.
To connect cable TV without a
converter/descrambler box:
1 Connect one end of a 75 ohm cable to the
AIR/CABLE IN jack on the back of your TV.
2 Connect the other end of the cable to the
cable TV wall outlet.
To connect cable TV with a
converter/descrambler box:
• Use the following illustration to connect a
converter/descrambler box. (The RF switch
and the signal splitter are not provided.)
Set the RF switch to the A position to watch
unscrambled channels controlled by your TV
remote control. Set the RF switch to the B
position to watch scrambled channels
controlled by the converter/descrambler
controls.
To connect digital cable TV
75 ohm cable
300 ohm cable
VHF/UHF Antenna
300 ohm twin-lead
75 ohm
coaxial
300/75 ohm adapter
(not included)
OUT
IN
UHF Antenna
VHF Antenna
Combiner (not
included)
300 ohm twin-lead
75 ohm coaxial
300 ohm twin-lead
RF switch
Cable converter/descrambler box
T
wo-set s
i
gna
l
sp
li
tter
Out
In
A
B
TV
Back of TV
TV cable wall
jack or antenna
08-1143 NS-PDP32-09 - ENG.fm Page 8 Friday, May 2, 2008 10:28 AM