Filter
Top Products
23
Connecting the Power/Turning on the DPS-6.5
Before connecting
• Make sure that all the connections on pages 17 – 21
are complete (the connection to a TV is required).
Note:
• This player features a screen saver and an auto power
off function. If the player is stopped and no button is
pressed for five minutes, the screen saver starts. If the
disc tray is closed but no disc is playing and no control
is pressed for 30 minutes, the player automatically
goes into standby.
DPS
-
6.5
Open
/Close
Pause
Stop Play
Standby/On
Standby
Progressive
Play Mode
Clear
Display
Dimmer
Standby/On
Standby indicator
On
Standby
Open/
Close
Play Mode
Display
123
456
789
0
Clear
Dimmer
Top Menu Menu
Return Setup
Audio Angle Subtitle Zoom
Stop Play Pause
Down Up
T
V Control
T
V/
Video Channel
On/
Standby
Volume
RC
-
583DV
Enter
On
1
Plug the supplied power cord into
the AC INLET and then into the
power outlet on the wall.
• Do not use a power cord other than the
one supplied with the DPS-6.5. The
power cord supplied is designed for
use with the DPS-6.5 and should not
be used with any other device.
•Never have the power cord discon-
nected from the DPS-6.5 while the
other end is plugged into the wall out-
let. Doing so may cause an electric
shock. Always connect by plugging
into the wall outlet last and disconnect
by unplugging from the wall outlet
first.
2
Press Standby/On on the DPS-6.5
or On on the remote controller.
The DPS-6.5 turns on and the Standby
indicator turns off.
•To put the DPS-6.5 in the standby
mode, press Standby/On on the DPS-
6.5, or Standby on the remote control-
ler. Be sure to set the volume to mini-
mum before putting the DPS-6.5 in the
standby mode for the next use to avoid
sudden loud sound reproduction.
• While the Standby indicator lights up,
the DPS-6.5 can receive signals from
the remote controller.
• Setting the Standby/On button to
standby does not shut off the power
completely.
To a wall outlet
Standby/On
On
Remote
controller
DPS-6.5.book Page 23 Thursday, August 5, 2004 3:27 PM