Filter
Top Products
26
Getting Started
—Continued
Note:
•You may find with some DVD discs that some play-
back controls don’t work in certain parts of the disc.
This is not a malfunction.
The table below shows the basic controls on the remote
for playing discs. The following chapter covers other
playback features in more detail.
With the exception of DVD-Audio and SACD discs,
when you stop playback of a disc, RESUME is shown in
the display indicating that you can resume playback
again from that point.
If the disc tray is not opened, the next time you start play-
back the display shows RESUME and playback resumes
from the resume point. (If you want to clear the resume
point, press (stop) while RESUME is displayed.)
If you take a VCD out of the player after stopping play-
back, the last play position is stored in memory. If the
next disc you load is the same one, the display shows
LAST MEM and playback will resume. For DVD-Video
discs (except VR mode DVD-RW), the player stores the
play position of the last five discs. When one of these
discs is next loaded, you can resume playback.
Notes:
• The Last Memory function doesn’t work with VR for-
mat DVD-RW, DVD-Audio or SACD discs.
• If you don’t need the Last Memory function when you
stop a disc, you can press Open/Close to stop playback
and open the disc tray.
3
Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc
(if you’re loading a double-sided DVD
disc, load it with the side you want to
play face down).
4
Press (play) to start playback.
If you’re playing a DVD or Video CD, an
on-screen menu may appear. See “DVD
disc menus” on page 27 and “Video CD
PBC menus” on page 27 for more on
how to navigate these.
• If you’re playing an MP3/WMA disc,
it may take a few seconds before play-
back starts.
Basic playback controls
Play
Play
Remote
controller
On
Standby
Open/
Close
Play Mode
Display
123
456
789
0
Clear
Dimmer
Top Menu Menu
Return Setup
Audio Angle Subtitle Zoom
Stop Play Pause
Down Up
T
V Control
T
V/
Video Channel
On/
Standby
Volume
Enter
/
/
Numbers
Button What it does
Starts playback.
If the display shows RESUME or LAST
MEM playback starts from the resume
or last memory point (see also “Resume
and Last Memory” on page 26.)
Pauses a disc that’s playing, or
restarts a paused disc.
Stops playback.
See also “Resume and Last Memory”
on page 26.
(remote only)
Press to start fast reverse scanning.
Press (play) to resume normal
playback.
(remote only)
Press to start fast forward scanning.
Press (play) to resume normal
playback.
Skips to the start of the current track or
chapter, then to previous tracks/chapters.
Skips to the next track or chapter.
Numbers
(remote only)
Use to enter a title/chapter/track number.
Press Enter to select.
• If the disc is stopped, playback starts
from the selected title (for DVD),
group (for DVD-Audio) or track (for
CD/SACD/Video CD).
• If the disc is playing, playback jumps
to the start of the selected title (VR
mode DVD-RW), chapter (DVD-
Video) or track (DVD-Audio
*1
/SACD/
CD/Video CD)
*1 within the current group
Resume and Last Memory
DPS-6.5.book Page 26 Thursday, August 5, 2004 3:27 PM