Filter
Top Products
50
Initial Settings menu
—Continued
You only need to make this setting if you connected this
player to your amplifier using the 5.1 channel analog
outputs.
These settings do not affect any digital audio output.
To get the best surround sound from your system, you
should set up the speaker distances from your listening
position.
Note:
• During playback of SACD and MPEG-audio DVD-
Video discs, the effective C, LS and RS speaker dis-
tance settings are –3 ft (–0.9m) to 0 ft (0 m) relative to
the front left/right speakers.
4
Press (cursor left) to go back to
the speaker list if you want to mod-
ify another speaker, or press Enter
to exit the Speaker Installation
screen.
Speaker Distance
1
Use the / (cursor up/down) to
select a speaker.
• The L and R speakers are paired; you
can’t set them differently.
2
Press (cursor right) to change
the speaker distance for the high-
lighted speaker.
3
Use the / (cursor up/down) to
change the distance.
• When you change the distance settings
of the front left (L) or front right (R)
speakers, all the other speaker dis-
tances change relative to it.
• Front left/right (L/R) speaker dis-
tances can be set from 1 ft (30 cm) to
10 ft (9 m) in 1 ft (30 cm) increments.
• The center speaker (C) can be set from
–7 ft (–2.1 m) to 0 ft (0 m) relative to
the front left/right speakers.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Audio Output Mode
Speaker Distance
Speaker Installation
Initial Settings
5.1 Channel
Enter
Digital Audio Out
Video Output
Language
Display
Options
Speakers
L
C
R
RS
LS
3.0m
3.0m
3.0m
3.0m
3.0m
Initial Settings
Enter
• Surround left/right (LS/RS) speakers
can be set from – 20 ft (–6.0 m) to 0 ft
(0 m) relative to the front left/right
speakers.
•You can’t set the subwoofer (SW) dis-
tance.
4
Press (cursor left) to go back to
the speaker list if you want to mod-
ify another speaker, or press Enter
to exit the Speaker Distance
screen.
DPS-6.5.book Page 50 Thursday, August 5, 2004 3:27 PM