Filter
Top Products
28 Intel® Server Chassis SC5400 User’s Guide
6. Remove the DVD/CD-ROM drive/slide assembly from the chassis by pressing in
on the slide release latches (see letter “A” in the following figure). Remove the
slides from the DVD or CD-ROM drive by pulling the slides away from the drive
(see letter “B”). A gentle pull should release the slide from the side dimple on the
drive.
7. If not replacing with another drive, re-attach pair of slides to an EMI shield and re-
insert EMI shield/slide assembly into chassis for proper airflow.
Figure 19. Re-inserting Empty EMI Shield/Slide Assembly into Chassis
8. Install the front bezel. For instructions, see “Removing and Installing the Front
Bezel” on page 18.
9. Install the chassis cover. For instructions, see “Installing the Chassis Cover” on
page 17.
10. Plug all peripheral devices and the AC power cable into the server.
11. Power up the server.
AF000575
A
A
B
B
AF000605