Filter
Top Products
Intel® Server Chassis SC5400 User’s Guide 29
Installing a DVD or CD-ROM Drive
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover” on
page 16.
4. Remove the front bezel if it is installed. For instructions, see “Removing and
Installing the Front Bezel” on page 18.
5. Remove an EMI shield/slide assembly from the upper device bay by pressing the
two slide assembly latches inward (see letter “A” in the following figure). Remove
the slides from the EMI shield by pulling the slides away from the EMI shield to
release them from the EMI shield (see letter “B”).
Figure 20. Removing EMI Shield/Slide Assembly from Upper Device Bay
6. Attach slides to the DVD or CD-ROM drive by pressing the slides firmly into the
side dimples on the DVD or CD-ROM drive.
Figure 21. Attaching Slides to a DVD or CD-ROM Drive
AF000945
A
A
B
B
AF000576