Intel SC5400 Home Theater Server User Manual


 
Intel® Server Chassis SC5400 User’s Guide 51
Installing Additional Hot Swap Power Supply
Module
Caution: This step only applies to a chassis with redundant power supply capability. Do not
perform this step if your chassis has a fixed power supply.
1. Remove screws (see letter “A” in the following figure). Remove the power supply
filler panel (see letter “B”).
Figure 53. Removing Power Supply Filler Panel
2. Insert the power supply module until it clicks into place. Secure with screw (see
letter “A” in the following figure) if shipping chassis to another location.
Figure 54. Installing Additional Hot Swap Power Supply Module
AF000602
A
B
A
AF000603
A