Filter
Top Products
38
Troubleshooting
• Have you attempted to use the remote
control at the sides or rear of the TV or at
a location more than seven meters apart
from the TV location? Operate the remote
control in the front of your TV or a
location less than seven meters from
your TV to try to solve the ploblem.
• Is the CHILD LOCK function set to ON?
If the CHILD LOCK function is set to ON,
you cannot operate the TV with the front
control buttons of the TV. Follow the
description "CHILD LOCK" on page 24
to try to set the CHILD LOCK function to
OFF.
• If the TV operation becomes disabled
suddenly, press the Main power button
on the TV and turn off the main power.
Try to press the Main power button again
to turn on the main power. If the TV
returns to a normal state, it is not a
failure.
• The following functions do not operate
when receiving Progressive Video Signal
(525P signal);
Remote control function:
ZOOM, PIP, MULTI, FREEZE and
STROBE BUTTON
MENU function:
SHARP,
TINT, DIGITAL VNR, Digipure
and ZOOM
• Are your COLOUR SYSTEM settings for
the TV channels correct? Follow the
description "COLOUR SYSTEM button"
on pege 11 to try to solve the trouble.
• Has COLOUR or BRIGHT been controll-
ed properly? Follow the description
"Adjusting the picture" on page 18 to try
to adjust them properly.
• When a white and bright still image (su-
ch as a white dress) is displayed on the
screen, the white part may look as if it
were coloured.
It is a phenomenon unavoidable due to
the nature of the picture tube itself, and
not due to a TV failure.
When the picture disappears from the
screen, the unnatural colours will also
disappear.
• When viewing images from commercially
available video softwear products, or vi-
deos from videotapes which have been
recored improperly, the top of the image
may be distored.
This is due to the condition of the video
signal, and not because of malfunction.
Poor sound
• Have you adjusted BASS or TREBLE
properly? If not, follow the description
"Adjusting the Sound" on page 22 to try
to adjust them properly.
• When the TV channel reception is poor, it
can be hard to hear the stereo or
bilingual sound. In this case, follow the
description "STEREO / I • II" on page 22
to hear the sound more easily by
changing it to a mono sound.
Operation disabled
• Have the batteries of the remote control
become exhausted?
Follow the description "Putting the
Batteries into the Remote Control" on
page 4 and replace them with new
batteries to try solve the problem.
LCT1217-001A-H/p20-40 4/9/02, 7:11 PM38
Black