Filter
Top Products
10
NOTE
AFC :NORMAL
AFC :NORMAL
ENTER
q
MENU
r
ASPECT RAT IO
F I LTER SELECT
PEAK ING
FREQ.
PEAK ING
LEVEL
AFC
COLOR
TEMP.
NTSC
SETUP
COMPO. LEVEL
q
MEMORY MODE
r
RGB
/
COMPO(SDI)
:4-3
:COMB
:2.6MHZ
:0dB
:NORMAL
:6500
:7.5
:BETA75
:RGB
:
NOTE
ON-SCREEN MENU CONTROLS
By calling up the menu display on screen, various functions can be selected and set
as needed.
Calling up the menu display, selecting an item
1.
Press the MENU button to call up the menu display on screen (see
11
11
1
below). (Press again to make the display disappear.)
2. Press the ▲ or ▼ button to select an item to be set. “ ” is indicated for the
selected item.
3. Press the or button to change the setting.
4. After selecting another item by pressing the ▲ or ▼ button, repeat step 3.
These settings are all kept in memory after power is turned off.
5. Press the MENU button to complete. The menu display disappears.
FILTER SELECT (built-in filter selection)
When a composite video signal of the NTSC system (excluding NTSC
4.43) is input to the monitor, either or both of two filters in the monitor can
be activated.
● The function can be operated and
the indication appears only when a
composite video signal of the NTSC
system (excluding NTSC 4.43) is
input to the monitor.
ASPECT RATIO (picture aspect ratio switching)
The aspect ratio of the picture can be switched between 4:3 and 16:9.
When switching to “16-9” on screen, the height of the picture is slightly
reduced (see right).
● When the menu display
11
11
1 (shown at
left below) is on screen, press the
ENTER button. The display changes
to
22
22
2 (shown below center). In this
state, you can also select the item or
change the setting.
● When the display
22
22
2 is on screen,
each time the ▼ button is pressed
while the ENTER button pressed,
the indication moves up or down on
screen (the display
33
33
3). Press the
MENU button with display
22
22
2 or
33
33
3
on screen, and the display is
restored to
11
11
1.
● If no operation occurs for about 5
minutes after calling up the menu
display on screen, the display
disappears automatically.
33
33
3
22
22
2
11
11
1
● 4:3
● 16:9
Setting Function
4-3 Standard picture aspect ratio (4:3)
16-9 Displays the picture in 16:9 aspect ratio
Setting Function
COMB (comb filter) Reduces colour noise in NTSC video signals for clearer pictures.
BOTH (both filters) Both comb and trap filters function at the same time.
NOTCH (Trap filter) Eliminates dot interference that would show up in the vertical
boundary between two different colours.