Filter
Top Products
16
NOTE
SET-UP FOR MONITOR INSTALLATION (continued)
STATUS DISPLAY (setting the status display to on/off)
When the power is turned on or the input mode is switched, the
status display (color system and input mode) appears on screen. The
display can be set to on or off.
CONTROL LOCK (deactivation of front-control functions)
Set CONTROL LOCK to ON on screen to deactivate the front-control
functions (front VOLUME control and remote volume control are operable).
● If you attempt to operate a locked
function, “CONTROL LOCK ON!!”
appears on screen for approx. 2
seconds to indicate the function
cannot be operated.
● Once CONTROL LOCK is deacti-
vated, the current settings of the
front-control knobs and buttons are
activated.
● If the power is turned off with
CONTROL LOCK activated, the
function is kept in memory.
Setting Function
ON Status display appears.
OFF Status display does not appear.
Setting Function
ON Deactivates the front controls
(except front/remote volume controls).
OFF Releases deactivated functions.