Filter
Top Products
12
q
MEMORY MODE
r
Are you sure ?
g
Yes
h
then
g
No
h
then or
ENTER
q
MEMORY MODE REV I SE
P ICTURE ADJUSTMENT
ASPECT RAT IO
F I LTER SELECT
PEAK ING
FREQ.
PEAK ING
LEVEL
AFC
COLOR
TEMP.
NTSC
SETUP
COMPO. LEVEL
:4-3
:COMB
:2.6MHZ
:0dB
:NORMAL
:6500
:7.5
:BETA75
:
ENTER
NOTE
NOTE
NOTE
Setting programming of the picture being monitored
The settings of the picture being monitored can be programmed in
memory.
Settings programmable in memory mode:
● Settings of the CONTRAST, BRIGHT, CHROMA and PHASE controls on the
front panel
● On-screen menu function settings (except RGB/COMPO(SDI))
● Remote-control picture adjustment settings
1. Check the MEMORY MODE switch is off.
2. Press the MENU button.
3. Press the ▲ or ▼ button to select MEMORY MODE.
Then press the ENTER button.
4. ● Press the ENTER button to program.
● Press the or button to cancel.
MEMORY MODE
A set of picture settings can be programmed in memory
for quick recall when necessary.
● If you attempt to operate a locked
function, “MEMORY MODE ON!!”
appears on screen for approx. 2
seconds to indicate the function
cannot be operated.
Recall/release of memory mode
Press the MEMORY MODE switch to recall a set of picture settings
programmed in memory.
Pressing the switch locks the functions of the front-panel PHASE,
CHROMA, BRIGHT, CONTRAST controls, and remote-control picture
adjustments not to be operated.
Press again to release memory mode.
● No matter what video signal is input,
all items appear on screen. How-
ever, depending on the type of input
video signal, some functions might
not operate even if their settings are
made.
Revision of memory mode
Programmed picture settings can be revised if necessary.
1. Press the MEMORY MODE switch to activate memory mode.
2. Press the MENU button to call up display
11
11
1 on screen.
● Programmed picture settings are
kept in memory after the power is
turned off.
11
11
1