Filter
Top Products
E-23
Display Contents
COPY INHIBIT
REC INHIBIT
A. DUB INHIBIT
(REC TAB)
A. DUB INHIBIT
(48K)
A. DUB INHIBIT
(LP)
A. DUB INHIBIT
(BLANK)
A. DUB INHIBIT
(DV)
A. DUB INHIBIT
(NTSC/PAL)
A. DUB INHIBIT
(DVCAM)
OPERATION
LOCK
The user attempts to record signals protected with the copy guard.
The user attempts to record on a write protected cassette tape.
(The rear slide is pushed to “SAVE”.)
The user attempts to perform audio dubbing on a write protected cassette tape.
(The rear slide is pushed to “SAVE”.)
This message is displayed when audio dubbing is attempted under the following con-
ditions:
• The AUDIO MODE item of the AUDIO/VIDEO menu is set to 48K.
• The tape is recorded with a sample frequency of 48kHz.
The user attempts to perform audio dubbing on a tape recorded in the LP mode.
The user attempts to perform audio dubbing on a blank tape.
The user attempts to perform audio dubbing during DV signal input. (The INPUT SEL.
switch is set to “DV”)
This message is displayed when the signal system is changed during audio dubbing
(NTSC or PAL).
The user attempts to perform audio dubbing on a DVCAM format tape.
This message is displayed when a button on the unit is pressed while the OPERA-
TION LOCK function is engaged (ie, the OPERATION item of the SYSTEM (2/2) menu
is set as “ON”).
Ⅵ Warning display : When anomalies occur in the VTR, warning messages with error
codes will be displayed.
32K CH–1/2
SP
000
min
W
ARNING 7001
DRUM MOTOR FAI LURE
10/10/02 STANDBY
-
OFF
12:00:00 TCR 02:00:00:00
Warning display
For details, please
refer to page 66,
“Warning Display”.