E-43
Setting
Ⅵ REMOTE SEL. switch on the front panel
To use the wireless remote controller, set the switch to “WIRELESS”.
Ⅵ SYSTEM menu
• STL/F.ADV MODE
Use this to select the image type for still image playback or frame
advance playback.
(Field image, 1st field image, 2nd field image and frame image)
Note: Still images can also be selected with the STILL MODE
button of the wireless remote controller.
• LONG PAUSE TIME
Use this menu item to set the time interval, after the lapse of
which, the unit will go into the tape protection mode.
(5, 3, 2 or 1 minute, 30 seconds)
• LONG PAUSE MODE
Use this mode to select the operation state when tape protection
mode is engaged after an extended period of being in the STILL
mode. (F.ADV or STBY-OFF)
• REPEAT MODE
Use this menu item to turn ON/OFF the REPEAT PLAYBACK
function or select the type of REPEAT PLAYBACK. To disable
REPEAT PLAYBACK, set it to “OFF”.
(OFF, INDEX, VIDEO END, TAPE END)
Ⅵ AUDIO/VIDEO menu
• A. OUT AT SEARCH
Use this menu item to turn ON/OFF audio output during variable
speed playback.
• AUDIO OUT SEL
Use this menu item to select the output audio channel when play-
ing tapes recorded in the 32kHz mode. (CH1/2, CH3/4, MIX)
• AUDIO OUT LEVEL
Use this menu item to select the audio output level (NORM,
ATT). Set it to “ATT” when playing tapes recorded at –12dB
with consumer DV devices.
• SETUP (NTSC only)
Use this setting to determine whether to apply the setups to the
composite video or Y/C separate video output signals.
Mini
PROFESSIONAL
DVCAM NTSC
PA L
RE
C
CH-1/3
CH-2/4
BR-DV3000
A.DUB
OPERATE
INPUT SEL.REMOTE SEL.
MIC
SERIAL
WIRELESS
9PIN
LINE
DV
Y/C
REMOTE SEL. switch
–––SYSTEM[1/2]–––
STL/F.ADV 2ND
BACKUP REC TIME OFF
LONG PAUSE TIME 5MIN
LONG PAUSE MODE F.ADV
INDEX
W
RITE ON
REPEAT MODE BLANK
NEXT PAGE
PAGE BACK
AUDIO VIDEO
AUDIO MODE 48K
AOUTATSEARCH ON
AUDIO OUT SEL CH-1/ 2
AUDIO OUT LEVEL NORM
SET UP(NTSC) OFF
PAGE BACK
SYSTEM (1/2) menu
AUDIO/VIDEO menu
Memo
To control the unit with the 9 PIN REMOTE or the SERIAL RE-
MOTE terminal, set the REMOTE menu item to “ON”.
Memo
AUDIO OUT SEL or AU-
DIO OUT LEVEL items
can also be set via the
AUDIO OUT SEL or AU-
DIO OUT LEV button on
the wireless remote con-
troller.