Filter
Top Products
E-41
RECORDING
–
Recording using the serial remote terminal
–
Recording can be turned ON/OFF with the serial remote controller or the footswitch connected
to the SERIAL REMOTE terminal on the rear panel.
Mini
PROFESSIONAL
SET
MENIU
EJECT
REC PLAY
PAUSE
REW
STOP
FF
DVCAM NTSC
PAL
REC INH.
CH-1/3
CH-2/4
BR-DV3000
A.DUB
OPERATE
INPUT SEL.REMOTE SEL.
MIC
SERIAL
WIRELESS
9PIN
LINE
DV
Y/C
DV IN/OUT
AUDIO VIDEO
LINE
Y/C
CH 1/3 CH 2/4
INOUT
REMOTE
SERIAL
9PIN
NTSC/PAL
NTSC PAL
DC12V
REMOTE SEL. switch
SERIAL REMOTE terminal
• Serial remote controller: RM-G30
• Footswitch
–––REMOTE[1/2]–––
REMOTE ON
LOCAL FUNCTION ALL KEYS
PREROLL 5S
REM FF/RE
WMODE FF/REW
REM STOP SEL EE
PB START DELAY OF
SYNCHRONIZATION ON
NEXT PAGE
PAGE BACK
–––REMOTE[2/2]–––
CONTROLLER SEL TYPE1
FOOT S
WOFF
PAGE BACK
REMOTE (1/2) menu
REMOTE (2/2) menu
Memo
• The serial remote con-
troller can perform op-
erations other than re-
cording.
• The buttons on the unit
to be rendered operable
can be set via the LO-
CAL FUNCTION item of
the REMOTE(1/2) menu.
Connection
Connect the serial remote controller (available separately: RM-G30)
or the footswitch to the SERIAL REMOTE terminal on the rear panel.
Setting
Ⅵ Set the REMOTE SEL. switch on the front panel to “SE-
RIAL”.
Ⅵ Set the REMOTE item of the REMOTE (1/2) menu to
“ON”.
Ⅵ Set the FOOT SW item of the REMOTE (2/2) menu ac-
cording to the way in which the serial remote terminal
is used.
OFF : Set to “OFF” when the serial remote controller is used.
The footswitch cannot be used.
L EDGE : Recording and recording pause operations are
switched at the LOW edge of the footswitch signal.
H EDGE :Recording and recording pause operations are
switched at the HIGH edge of the footswitch signal.
L LEVEL : Record at the LOW edge and pause recording at the
HIGH edge of the footswitch signal.
Operation
Before using the footswitch, first engage the recording or recording
pause mode via the buttons on the main unit.
Memo
• The footswitch can only be used for switching the recording
operation ON/OFF.
• The footswitch functions irrespectively of the REMOTE SEL.
switch settings.