JVC DR-MV1B DVD VCR Combo User Manual


 
Filename [DR-MV1SEK_05DVD Operation1.fm]
Masterpage:Left+
28 EN
Page 28 April 15, 2004 11:41 am
OPERATIONS ON DVD DECK
Still Picture/Frame-By-Frame Playback
1 Press 9 to pause playback.
2 Press 9 or we to activate frame-by-frame playback.
Each press of 9 advances the still picture frame by frame.
Each press of we advances/reverses the still picture frame by
frame.
Frame-by-frame playback for reverse direction cannot be performed
with Video CD/SVCD discs.
To resume normal playback, press 4.
Slow Motion
1 Press 9 to pause playback.
2 Press SLOW – (3) or SLOW + (5).
Each press of SLOW – (3) or SLOW + (5) increases the slow
motion speed for each direction (from 1/16 to 1/2 times the normal
speed).
Slow motion for reverse direction cannot be performed with Video
CD/SVCD discs.
OR
Press SLOW – (3) or SLOW + (5) for 2 or more seconds.
Skip Search
During playback, press .
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
Resume Function
It is possible to memorise the position where you stop playback
and resume playback from that position.
Be sure to set “RESUME” to “ON” or “DISC RESUME”. (pg. 81)
1 Press 8 during playback to memorise a resume point.
The unit enters Resume Stop mode and memorises the position
where you have stopped playback as a resume point. (The inside of
the disc status indicator on the front display panel blinks while
memorising.)
The unit retains a memory of the resume points of the last 30 discs
played back, even though they have been ejected if “RESUME” is set
to “DISC RESUME”. (pg. 81)
To clear the resume points:
(The inside of the disc status indicator stops blinking and lights.)
When “RESUME” is set to “ON”:
Press 1 to turn off the unit.
Press x to take out the disc.
Press 8 in stop mode.
Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
Press MENU to display the disc menu, then start playback by selecting
an item, etc.
When “RESUME” is set to “DISC RESUME”:
Set “RESUME” to “OFF”. (pg. 81)
Press 8 in stop mode.
Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
Press MENU to display the disc menu, then start playback by selecting
an item, etc.
2 Press 4 in stop mode to resume playback. The unit starts
playback from the resume point.
NOTES:
“DISC RESUME” setting works on DVD VIDEO, VCD, SVCD and
already finalised DVD-R/DVD-RW (video mode) discs. For other
types of discs, the function under “ON” setting will be applied even if
“RESUME” is set to “DISC RESUME”. (pg. 81)
If you stop the playback of a disc for which an resume point has
already been memorised, the memory will be updated with the new
resume point.
After the unit has memorised the resume point for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorised point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
When the unit memorises a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
This function may not work for some Video CD/SVCD.
When “RESUME” is changed to “ON” or “OFF” (
pg. 81), resume
points of the discs memorised with “RESUME” set to “DISC
RESUME” will be cleared.
Resume points are memorised for each side of a double-sided disc.
1
4
7
2
5
8
0
3
6
9
MENU
SLOW+ (5)
SLOW– (3)
4
98
MARK
2
6
ANGLE
REMAIN
DISPLAY
TOP MENU
SUBTITLE
rtwe
ENTER
SAT
DR-MV1SEK_00.book Page 28 Thursday, April 15, 2004 3:30 PM