Filter
Top Products
Filename [DR-MV1SEK_10Subsidiary.fm]
Masterpage:Left+
88 EN
Page 88 April 15, 2004 3:21 pm
SUBSIDIARY SETTINGS
Finalising DVD-R/RW discs recorded on this unit makes it possible
for the discs to be played back on other DVD players. DVD-RW
discs are finalised in the mode that the discs were formatted,
enabling playback on compatible DVD players.
Titles input in the Library Database DVD Navi are registered as
titles in the DVD menu. (੬ pg. 61)
Before finalising
● It is possible to record on a blank space.
● It is possible to enter a programme title. (੬ pg. 61)
● It is possible to delete programmes. (੬ pg. 61)
● It is impossible to overwrite recorded areas of DVD-R discs.
● Available recording capacity does not increase even if a recorded
programme is deleted from a DVD-R disc.
● It is impossible to record or edit DVD-R/RW discs recorded on other
devices even if they have not been finalised.
After finalising (For DVD-R/RW (Video mode) discs)
● Video and audio that have been recorded by then are recorded in
conformity to the DVD Video standard, enabling you to play back the
discs as DVDVIDEO discs.
● Although DVD-R/RW discs finalised on this unit become playable on
DVD players compatible with DVD-R/RW discs, some discs still may
not play, for which JVC cannot take responsibility.
● Marked points marked before finalising will be deleted, and
programmes will be divided automatically into “chapters”
approximately every 5 minutes. (੬ pg. 29)
● Depending on the DVD players and DVD-R/RW discs used, and on
the conditions of recording, it may not be possible to play back the
discs. In this case, play back the discs on this unit.
● Additional recordings become impossible.
Finalise A DVD-R/RW Disc
1 Perform steps 2 to 4 of “Format A DVD-RAM Disc” (੬ pg. 87)
before continuing.
2 Press rt to select “FINALISE”, then press ENTER. Press we
to select “YES”, then press ENTER when “DISC WILL BE
FINALISED” appears on the TV screen.
3 Press we to select “OK”, then press ENTER when
“FINALISING WILL MAKE DISC READ-ONLY” appears on the TV
screen.
4 Press SET UP to return to the normal screen.
● Menu screen is cleared.
● Once a DVD-R/RW (Video mode) disc has been finalised, the
displays for original and play list do not appear. Only display for
library appears.
● Once a DVD-RW (VR mode) disc has been finalised, it can be played
on DVD players compatible with VR mode.
Cancel The Finalisation Of A DVD-RW Disc
1 Load a DVD-RW disc to cancel the disc finalisation, and perform
steps 2 to 4 of “Format A DVD-RAM Disc” (੬ pg. 87) before
continuing.
2 Press rt to select “CANCEL DISC FINALISATION”, then
press ENTER.
3 Press we to select “OK”, then press ENTER when “CANCEL
DISC FINALISATION” appears on the TV screen.
4 Press SET UP to return to the normal screen.
● When the disc finalisation is cancelled, the mode in which the disc
was formatted is restored, making the disc recordable. (੬ pg. 9, 87)
Finalise A Disc (DVD Deck Only)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Load a DVD-R/RW disc to finalise.
1
4
7
2
5
8
0
3
6
9
ENTER
SET UP
rtw e
VCR/DVD
SAT
DR-MV1SEK_00.book Page 88 Thursday, April 15, 2004 3:30 PM