Filter
Top Products
4
Do not place combustibles behind the cooling fan. For
example, cloth, paper, matches, aerosol cans or gas
lighters that present special hazards when over heated.
Safety Precautions (cont.)
• When replacement parts are required, be sure the service technician has used replacement parts specifi ed by the
manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in fi re, electric
shock, or other hazards.
• Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
• Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them. Pay particular attention to cords
at doors, plugs, receptacles, and the point where they
exit from the product.
• For added protection of this product during a lightning
storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the cable system. This will prevent damage to
the product due to lightning and power line surges.
• Do not overload wall outlets, extension cords, or
convenience receptacles on other equipment as this can
result in a risk of fi re or electric shock.
• Use only the accessory cord designed for this product to
prevent shock.
• When connecting other products such as VCR’s and
personal computers, you should turn off the power of
this product for protection against electric shock.
• Do not use attachments not recommended by the
product manufacturer as they may be hazardous.
The product should be placed more than 30 cm (11
13
/16
inches) away from heat sources such as radiators, heat
registers, stoves, and other products (including amplifi ers)
that produce heat.
Maintenance
• Unplug this product from the wall outlet before
cleaning.
• Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
• Use a vacuum cleaner to get rid of the dust around the
intakes (all the openings) on the rear. If a vacuum is not
available, use a cloth and wipe it off . Failure to do so
will cause internal heat buildup and, therefore, cause
damage to the product.
02-04_GM-H40L1G-f.indd 402-04_GM-H40L1G-f.indd 4 05.10.6 1:18:19 PM05.10.6 1:18:19 PM