Filter
Top Products
Masterpage:Right-NoTitle0
EN
31
Filename [HDS1EU_2.fm]
Page 31 June 21, 2001 12:25 pm
Basic Playback
A
Load a cassette.
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointed toward the recorder.
● Do not apply too much pressure when inserting.
● The recorder’s power comes on automatically.
● While “– – – –“ is blinking on the front display panel, the tape
will run for a few seconds to search for the tape number.
● If the record safety tab has been removed, playback begins
automatically.
B
Select the VHS deck.
Press
S-VHS
.
● The S-VHS button lights on the recorder.
C
Find the programme start point.
If the tape is advanced past the start point, press
3
. To
go forward, press
5
.
D
Start playback.
Press
4
. “BEST” appears blinking in the recorder’s front
display panel during automatic tracking. (
੬
pg. 41)
● The VHS playback indicator lights on the recorder.
E
Stop playback.
Press
8
. Then press to remove the cassette.
●
Turn on the TV and select the AV mode.
●
If the recorder is turned on with HDD deck selected,
there may be about 30 seconds’ delay in starting to
show pictures on the screen.
Usable cassettes
● Compact VHS camcorder recordings
can be played on this video recorder.
Simply place the recorded cassette
into a VHS Cassette Adapter and it
can be used just like any full-sized
VHS cassette.
● This video recorder can record on
regular VHS and Super VHS cassettes. While only VHS
signals can be recorded on regular VHS cassettes*, both
VHS and Super VHS signals can be recorded and played
back using Super VHS cassettes.
* By using the S-VHS ET function, it is possible to record and
play back with S-VHS picture quality on VHS cassettes with
this recorder.
HDS1EU_.book Page 31 Thursday, June 21, 2001 12:30 PM