Filter
Top Products
Filename [HDS1EU_3.fm]
Masterpage:Left
44
EN
Page 44 June 21, 2001 12:29 pm
TIMER RECORDING (cont.)
Express Timer
Programming
You can programme this recorder to timer-record as many as 16
programmes.
If you do not know the S
HOW
V
IEW
number for the programme
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
A
Turn on the recorder.
Press
1
.
B
Select the deck.
Press
HDD
or
S-VHS
.
●
For the VHS deck:
Insert a cassette with the record safety tab intact.
C
Access the programme screen.
D
Enter the programme start time.
Press
START+/–
to enter the time you want recording to
start.
● Press and hold
START+/–
to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter the programme stop time.
Press
STOP+/–
to enter the time you want recording to
stop.
● Press and hold
STOP+/–
to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F
Enter the programme date.
Press
DATE+/–
.
● The current date appears on the TV screen. The date you enter
appears in its place.
G
Enter the channel position.
Press
PR+/–
.
H
Set the tape speed.
Press
MODE
(
p
).
●
For the VHS deck:
It is not possible to select EP mode if “COLOUR SYSTEM” is
set to “MESECAM”.
(
੬
pg. 76
)
Before performing Express Timer Programming:
● Make sure that the recorder’s built-in clock is set properly.
● Turn on the TV and select the AV mode.
Press
PROG
.
● When “PROGRAMME FULL
DELETE UNWANTED TIMER
PROGRAMME” appears on
the TV screen, you need to
cancel some of the reserved
programmes. (
੬
pg. 46)
PROGRAMME
CONFIRM CANCEL CATEGORY
HDD SEP
–
– : –
––
– : –
––
–
/
–
–
/
–
–
–
–
––
–
+
–
START
+
–
STOP
+
–
DATE
+
–
PR EXIT
PROG.
UNDECIDED
RECORD TO REC MODE
WEEKLY/DAILY
START STOP DATE
ON
VPS/PDC
TV PROG
CHANGE SETTINGS BY REMOTE
THEN CONFIRM
HDS1EU_.book Page 44 Thursday, June 21, 2001 12:30 PM