Filter
Top Products
Filename [HDS1EU_5.fm]
Masterpage:Left
90
EN
Page 90 June 21, 2001 12:30 pm
TROUBLESHOOTING
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are
often easily corrected, and this can save you the trouble of sending your video recorder off for repair.
POWER
TAPE TRANSPORT
PLAYBACK
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. No power is supplied to the
recorder.
●
The mains power cord is
disconnected.
Connect the mains power cord.
2. The clock is functioning properly,
but the recorder cannot be
powered.
●
“
#
” is displayed on the front
display panel with “AUTO TIMER”
set to “OFF”.
Press the
#
button to turn the “
#
”
indicator off.
3. The remote control won’t function.
●
The batteries are discharged. Replace the dead batteries with new
ones.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. The tape does not run during
recording.
●
“
i
” is displayed on the front display
panel.
Press
4
to turn the “
i
” indicator off.
2. The tape will not rewind or
fast-forward.
●
The tape is already fully rewound or
fast-forwarded.
Check the cassette.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. The playback picture does not
appear while the tape is running.
●
The TV receiver is not set to the AV
mode.
Set the TV to its AV mode.
2. Noise appears during visual
search.
●
This is normal.
3. Noise appears during normal
playback.
●
The automatic tracking mode is
engaged.
Try manual tracking. (
੬
pg. 36)
4. The playback picture is blurred or
interrupted while TV broadcasts
are clear or “USE CLEANING
CASSETTE” message appears on
the screen.
●
The video heads may be dirty. Use a dry cleaning cassette TCL-2UX
or consult your JVC dealer.
5. Breaks are noticeable in Hi-Fi
soundtrack.
●
The automatic tracking mode is
engaged.
Try manual tracking. (
੬
pg. 36)
HDS1EU_.book Page 90 Thursday, June 21, 2001 12:30 PM