Filter
Top Products
Filename [DVS3EK_2-EN.fm]
Masterpage:Left
38
Page 38 October 13, 2001 3:26 pm
TIMER RECORDING (cont.)
Express Timer
Programming
If you do not know the PlusCode number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
A
Turn on the recorder.
Press
1
.
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
OR
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
C
Select the deck.
Press
VHS
or
DV
.
D
Access the PlusCode screen.
Press
PROG
.
E
Access the Programme screen.
The front display panel looks like this:
F
Enter the programme start time.
The front display panel looks like this:
G
Enter the programme stop time.
Press
STOP+/–
to enter the time you want recording to
stop.
● Press and hold
STOP+/–
to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
Before performing Express Timer Programming:
● Make sure that the recorder’s built-in clock is set properly.
● Turn on the TV and select the AV mode.
123
456
789
1
2
1
2
3
0
3
4
4
Press
START+/–
. (If you’re
just starting out, “P1”
appears.)
Press
START+/–
to enter the
time you want recording to
start.
● Press and hold
START+/–
to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
DVS3EK_1-EN.book Page 38 Monday, November 5, 2001 1:43 PM