JVC HR-DVS3EK VCR User Manual


 
Masterpage:Right-Full-NoTitle0
71
Filename [DVS3EK_4-EN.fm]
Page 71 November 5, 2001 1:42 pm
DV MODE SET
* The default setting is
bold
in the table below.
8
SOUND MODE
12BIT
16BIT
Select the appropriate mode before recording on a Mini DV tape.
12BIT
: Enables Audio Dubbing later.
16BIT
: Audio Dubbing is impossible but the recorded sound quality is
higher than “12BIT”.
8
12BIT MODE
SOUND1
SOUND2
FULL SOUND
Select the appropriate mode when playing back an audio-dubbed Mini DV tape.
SOUND1
: Original recorded sound
SOUND2
: Audio-dubbed sound
FULL SOUND
:Original recorded sound and Audio-dubbed sound
NOTES:
When “12BIT MODE” is set to “FULL SOUND”, both the main and sub audio will be
audible for bilingual tapes.
To select only the main audio or only the sub audio of bilingual tapes, set “12BIT MODE”
to “SOUND1”.
8
AUDIO REC
NICAM
MONO
Select the appropriate mode when recording the NICAM bilingual programmes.
NICAM
: The NICAM audio programme will be recorded on the audio
track.
MONO
: The Standard (monaural) audio programme will be recorded on
the audio track.
DVS3EK_1-EN.book Page 71 Monday, November 5, 2001 1:43 PM