JVC HR-DVS3EK VCR User Manual


 
Filename [DVS3EK_3-EN.fm]
Masterpage:Left
60
Page 60 November 5, 2001 1:37 pm
REMOTE CONTROL
Remote Control
Functions
Remote A/B/C/D Code Switching
The remote control is capable of controlling four JVC video
recorders independently. Each of recorders can respond to one
of four codes (A, B, C or D). The remote control is preset to send
A code signals because your video recorder is initially set to
respond to A code signals. You can easily modify your video
recorder to respond to B, C or D code signals.
On the remote control
A
Display the code.
Press and hold
VHS
or
DV
on the remote control for over
2 seconds. The code currently set blinks on the LCD
panel.
B
Change the remote control code.
Press the
number key
1
” for A, “
2
” for B, “
3
” for C or “
4
for D.
C
Set the remote control code.
Press
OK
to set the code.
On the recorder
D
Display the code.
Press
4
on the recorder for over 5 seconds while the
recorder is turned off. The code currently set appears on
the front display panel.
If the code displayed on the front display panel is different
from the code set on the remote control, go to step
5
.
E
Change the recorder’s code.
Press
8
on the remote control. The code currently set on
the remote control will be applied to the recorder.
NOTE:
When “POWER SAVE” is set to “ON” (
pg. 67), it is
impossible to change the remote code.
123
456
789
1
2
1
2
3
0
3
4
4
LCD panel
1
32
DVS3EK_1-EN.book Page 60 Monday, November 5, 2001 1:43 PM