JVC HR-DVS3EK VCR User Manual


 
Masterpage:Right-NoTitle0
47
Filename [DVS3EK_3-EN.fm]
Page 47 November 5, 2001 1:37 pm
Normal Dubbing
(from VHS to DV)
NOTES:
If you set the dubbing direction incorrectly, you could erase an
important recording that you wanted to copy. It is
recommended to conduct a test with unimportant cassettes
first.
There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.
The superimposed indication during the operation or dubbing
is not recorded.
To cancel the dubbing mode, press
PR +/–
so that the dubbing
direction indicator ( VHS) goes off.
Before you start dubbing, set “SOUND MODE” to the
appropriate mode. (
pg. 71)
You can dub selected scenes on a tape, starting and stopping
wherever you wish.
A
Load cassettes.
For the VHS deck
Insert a VHS (or S-VHS) cassette with the record safety
tab removed.
For the DV deck
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
B
Select the dubbing direction.
Press .
The dubbing direction indicator ( VHS) lights.
C
Set the tape speed.
Press
DV
, then press
SP/LP (
p
)
.
“DV }
VHS” appears on the TV screen if “O.S.D.” is set to
“ON”. (
pg. 67)
D
Locate the start point on the VHS deck.
A
Press
VHS
.
B
Press
4
to start playback.
C
Press
9
to pause playback a little before the start
point.
E
Prepare the DV deck for dubbing.
A
Press
DV
.
B
Press and hold
9
and press
7
so that the DV deck
enters the Record Pause mode.
VHS playback indicator and DV recording indicator light.
F
Start dubbing.
Press
START
.
G
Pause dubbing.
Press
START
.
The DV deck enters the Recording Pause mode, then the VHS
deck enters the Dubbing Pause mode.
H
End dubbing.
Press
8
to stop recording on the DV deck. Then press
VHS
and press
8
to stop playback on the VHS deck.
123
456
789
1
2
1
2
3
0
3
4
4
1
32
DVS3EK_1-EN.book Page 47 Monday, November 5, 2001 1:43 PM