JVC HR-XVC23U DVD Player User Manual


 
Filename [XVC23U_06Index.fm]
Masterpage:Left+
16 EN
Page 16 12 February 2004 8:36 pm
INSTALLING YOUR NEW UNIT (cont.)
Component Video
Connection
(DVD deck only)
8To connect to a TV with component video input
connectors . . .
A
Connect the unit to TV.
A Connect the aerial, unit and TV as per Basic
Connection (
pg. 14).
B Connect the units COMPONENT VIDEO OUT
connectors to the TVs component video input
connectors.
B
Connect the unit to power source.
Plug the end of the AC power cord into an AC outlet. This
unit performs Plug & Play Set automatically. (
pg. 17)
The clock and tuner channels will automatically be set when
the antenna is connected and when the AC power cord is first
connected to an AC outlet. (If AUTO and the channel
indicator are displayed on the front display panel before the
unit is powered on, the clock and tuner channels are being set
automatically. Wait for the time to be displayed on the front
display panel before turning on the unit.)
NOTES:
You can obtain high-quality component video pictures.
If your TV is not stereo-capable, use the units AUDIO
OUTPUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction.
To operate the unit with your TV using the Component Video
connection, set your TV to its AV mode. You can also use the
TV/VCR button on the units Remote to set JVC TV to the AV
mode.
For switching the TVs mode, refer to the instruction manual of
your television.
By using the component video connection, you can view the
images in the progressive mode. For switching to the
progressive mode, refer to Scan Mode Set (DVD deck)
(
pg. 80).
A
TTENTION
Be sure to connect the units VIDEO OUTPUT (DVD/
VCR) connector to the TVs VIDEO input connector.
TV
To Component Video
Input connector
Component
Video cable
(not supplied)
Audio/Video
cable
(supplied)
AC outlet
AC power cord
Back of unit
RF cable
(supplied)
COMPONENT VIDEO
OUT
Antenna or Cable
Matching transformer
(not supplied)
Coaxial cable
Flat feeder
VIDEO OUTPUT
AUDIO OUTPUT
VHF/UHF
OUT
VHF/UHF
IN
To 75 ohm
Terminal
XVC23U_01.book Page 16 Thursday, February 12, 2004 9:28 PM