JVC HR-XVC23U DVD Player User Manual


 
Filename [XVC23U_08DVD.fm]
Masterpage:Left
42 EN
Page 42 12 February 2004 8:36 pm
OPERATIONS ON DVD DECK
Basic Playback
To play back a MP3/JPEG disc, see pages 62 67.
A
Load the disc.
A Press OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
The units power comes on automatically.
B Place the disc in the disc tray.
For details, refer to Placing a Disc ( pg. 9).
C Press OPEN/CLOSE (x) on the DVD deck to close the
disc tray.
Pressing PLAY (4) also close the disc tray.
Playback begins automatically if the auto-playback DVD disc
is loaded. Although the VCR deck is selected, the DVD deck is
selected automatically if the VCR deck is in stop mode.
"no dc" appears on the front display panel when there is no
disc present on the disc tray.
B
Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the Remote
Press DVD so that the DVD indicator lights up.
C
Start playback.
Press PLAY (4).
Example: DVD VIDEO
You can switch the display on the front display panel between
the title number/chapter number and the elapsed time by
pressing DISPLAY.
It may take a few seconds to start playback.
If you load a DVD disc whose region code does not match the
DVD deck, REGION CODE ERROR! appears on the TV
screen. For details, refer to Region Number (
pg. 7).
With Video CD discs with PBC control or some DVD discs,
the menu display may appear on the TV screen after starting
playback. In this case, select an item which you want to play
back from the menu. Otherwise, the playback cannot go
forward. Refer to Locating a desired scene using the menu of
the Video CD with PBC (
pg. 43) or Locating a desired
scene using the DVD menu (
pg. 43).
D
Pause playback.
Press PAUSE (9).
To resume normal playback, press PLAY (4).
E
Stop playback.
Press STOP (8). Press OPEN/CLOSE (x) on the DVD
deck to open the disc tray, then remove the disc.
Pressing PLAY (4) resume playback from the position where
you stop playback. For details, see Resume Function on
page 45.
NOTE:
When you press OPEN/CLOSE (x) while the unit is turned off,
the units power comes on and the disc tray opens automatically.
Turn on the TV and select the AV mode.
Slide the TV/VCR/DVD switch to the right.
ATTENTION
You can not use the DVD deck when the VCR deck is in
the Automatic Satellite Recording standby and recording
mode.
You can use the DVD deck when the VCR deck is in the
timer standby mode.
Title number Chapter number
Elapsed time
XVC23U_01.book Page 42 Thursday, February 12, 2004 9:28 PM