JVC HR-XVC23U DVD Player User Manual


 
Masterpage:Right
EN 81
Filename [XVC23U_11Trouble.fm]
Page 81 12 February 2004 8:36 pm
TROUBLESHOOTING
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are
often easily corrected, and this can save you the trouble of sending your unit off for repair.
POWER
TAPE TRANSPORT (VCR deck)
PLAYBACK (VCR deck)
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. No power is supplied to the unit. The AC power cord is disconnected. Connect the AC power cord.
2. The Remote wont function. The batteries are discharged. Replace the dead batteries with new ones.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. During recording, the tape does not
run. The counter display blinks on the
front display panel.
The unit is in the Record Pause mode. Press PLAY (4) to resume recording.
2. The tape will not rewind or fast-
forward.
The tape is already fully rewound or
fast-forwarded.
Check the cassette.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. The VCR deck can not be operated. The VCR deck is not selected. On the unit
Press VCR/DVD repeatedly so that the
VCR indicator lights up.
On the Remote
Press VCR so that the VCR indicator lights
up.
2. The playback picture does not appear
while the tape is running.
The TV receiver is not set to the AV
mode.
Set the TV to its AV mode.
3. Noise appears during visual search. This is normal.
4. Noise appears during normal
playback.
The automatic tracking mode is
engaged.
Try manual tracking. (
pg. 32)
5. The playback picture is blurred or
interrupted while TV broadcasts are
clear or USE CLEANING CASSETTE
message appears on the screen.
The video heads may be dirty. Use a dry cleaning cassette ECL-3F, or
consult your JVC dealer.
6. Breaks are noticeable in Hi-Fi
soundtrack.
The automatic tracking mode is
engaged.
Try manual tracking. (
pg. 32)
XVC23U_01.book Page 81 Thursday, February 12, 2004 9:28 PM