JVC HR-XVC23U DVD Player User Manual


 
Filename [XVC23U_06Index.fm]
Masterpage:Left+
26 EN
Page 26 12 February 2004 8:36 pm
INITIAL SETTINGS (cont.)
Tuner Set
Auto Channel Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
A
Turn on the unit.
Press POWER (1).
B
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C
Access the Main Menu screen.
Press SET UP.
D
Access the Tuner Set screen.
E
Perform Auto Channel Set.
Press rt to move the
highlight bar (arrow) to
AUTO CHANNEL SET, then
press ENTER or e. You can
automatically set the
receivable channels in your
area in the order of their
frequencies.
When Auto Channel Set is
complete, SCAN
COMPLETED appears on the
TV screen.
If the scan was unsuccessful,
SCAN COMPLETEDNO
SIGNAL–” appears on screen.
Check the connections and start
again.
F
Return to the normal screen.
Press SET UP.
Turn on the TV and select the AV mode.
Slide the TV/VCR/DVD switch to the right.
INFORMATION
The unit selects the correct band (TV or CATV) automatically
during Auto Channel Set. The selected band will be
displayed on the right side of BAND on the Tuner Set
screen.
Press rt to move the
highlight bar (arrow) to
TUNER SET, then press
ENTER or e.
XVC23U_01.book Page 26 Thursday, February 12, 2004 9:28 PM