JVC HR-XVC23U DVD Player User Manual


 
Masterpage:Right-No-Heading
EN 69
Filename [XVC23U_09Editing.fm]
Page 69 12 February 2004 8:36 pm
Edit To Or From
Another Video
Recorder
You can use your unit as the source player or as the
recording deck.
A
Make connections.
A When using your unit as the source player ...
... connect its AUDIO/VIDEO OUTPUT connectors to the
audio/video input connectors on another recorder.
B When using your unit as the recording deck ...
... connect its AUDIO/VIDEO input connectors to the
audio/video output connectors on another recorder.
B
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C
Set the input mode of recording deck.
With this video unit, press AUX (number key 0) and/or
CH to select F-1.
When using another recorder as the recording deck, refer to its
instruction manual.
D
Set the edit mode.
See PICTURE CONTROL on page 75.
E
Engage the Record Pause mode of the
recording deck.
Locate the point where you start recording, then engage
the Record Pause mode.
F
Start the source player.
Engage the Play mode of the source player.
G
Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
All necessary cables can be obtained from your dealer.
When you select EDIT to dub tapes in step D, be sure to select
NORM after you finish dubbing the tapes.
When you use this unit as the source player for editing, be sure to set
SUPERIMPOSE to OFF before starting. (
pg. 75)
A
B
AV mode
Audio/video
cable
Recorder
Your unit
Another recorder
PlayerTV receiver
Audio/video cable
Your unit
Another recorder
Player
TV receiver
Recorder
Audio/video
cable
Audio/video cable
AV mode
Slide the TV/VCR/DVD switch to the right.
XVC23U_01.book Page 69 Thursday, February 12, 2004 9:28 PM