JVC HR-XVC27UM DVD VCR Combo User Manual


 
Filename [XVC27UM_06Index.fm]
Masterpage:Left+
10 EN
Page 10 14 June 2004 4:20 pm
INDEX (cont.)
ON-SCREEN DISPLAY (VCR deck)
If you press ON SCREEN on the Remote when “SUPERIMPOSE” is set to “ON” ( pg. 73), various operational
indicators appear on the TV screen.
For On-screen display for DVD deck, refer to “Using the on-screen bar” ( pg. 46).
A Operation Mode Indicators
B Tape Speed (SP/EP)
C Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press REW (3)
or FF (5) from the Stop
mode or perform an Index
Search. (
pg. 28) The
position of “q” in relation to
“B” (beginning) or “E” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
D Index number pg. 28
E Tape Remaining Time Indicator pg. 33
F Counter Display
G Audio Mode Display pg. 30
H SAP Indicator pg. 33
I Stereo Program Indicator pg. 33
J Day/Clock Display
K Channel Position Number/Auxiliary Input
Indicator (F-1)
L “Cassette Loaded” Mark
Beginning End
To recall an indication
A Press ON SCREEN.
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record
Pause mode, remain on the screen.
B Press ON SCREEN again to clear the display.
The RECORD/PAUSE indication remains on the screen.
XVC27UM_06Index.fm Page 10 Monday, June 14, 2004 4:20 PM