JVC HR-XVC27UM DVD VCR Combo User Manual


 
Masterpage:Right-No-Heading
EN 27
Filename [XVC27UM_07S-VHS.fm]
Page 27 14 June 2004 4:21 pm
Playback Features
Still Picture/Frame-By-Frame
Playback
1 Pause during playback.
Press PAUSE (9).
If there is vertical jitter, press CH +/– on the Remote or on the
unit to correct the picture.
2 Activate frame-by-frame playback.
Press PAUSE (9) to advance a still picture.
Slow Motion
1 Pause during playback.
Press PAUSE (9).
2 Activate slow motion playback.
Press and hold PAUSE (9) for 2 seconds, then release.
Press PAUSE (9) and release again to return to still
picture.
NOTE:
During slow motion playback, some noise may appear on the
TV screen. Press CH + or on the Remote or on the unit to
eliminate the noises.
Variable Speed Search
During playback, press FF (5) for forward variable
speed search, or REW (3) for reverse variable speed
search.
The speed changes for each direction by pressing REW (3)
and FF (5) repeatedly.
When pressing FF (5):
(SP): +5x{+7x
(EP): +11x{+21x
When pressing REW (3):
Once REW (3) is pressed, reverse search starts in –1x
normal playback speed. After this process, each press of REW
(3) changes the search speed between –5x and –7x in SP
mode, –11x and –21x in EP mode.
(SP): –1x]–5x{–7x
(EP): –1x]–11x{–21x
Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
ATTENTION
In the search, still, slow-motion or frame-by-frame playback
mode,
the picture will be distorted.
the noise bars will appear.
there may be a loss of color.
you cannot hear the sound.
CH +/–
To resume normal playback, press PLAY (4).
XVC27UM_07S-VHS.fm Page 27 Monday, June 14, 2004 4:21 PM