JVC HR-XVC27UM DVD VCR Combo User Manual


 
Masterpage:Right-No-Heading
EN 45
Filename [XVC27UM_08DVD.fm]
Page 45 14 June 2004 4:21 pm
VFP function
— Adjusting the picture quality
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programming,
picture tone or personal preference.
NOTE:
Before you start operation;
The VFP setting screen disappears if no operations are done for
more than about 10 seconds. If the setting screen disappears
before you finish, start from step 1 again.
1 Access the VFP setting menu.
2 Select the VFP mode.
Press we repeatedly.
Each time you press we, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
NOTE:
You cannot adjust the parameters of “NORMAL” and
“CINEMA”.
To adjust picture appearance manually
3 Access USER menu.
4 Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
Adjust gradually and confirm picture appearance results are as
preferred.
VFP menu disappears and the following pop-up window
appears on the TV screen.
The selection menu disappears automatically if you do not
change the selection for 10 seconds.
5 Adjust the parameter.
Press rt repeatedly to change the setting, then press
ENTER.
The current VFP settings appear again.
6 Adjust the other parameters.
Repeat steps 4 and 5 to adjust other parameters.
To return to the normal screen
Press DVD PICTURE.
To activate your setting
Press DVD PICTURE, then press we repeatedly to select
“USER 1” or “USER 2” that you have changed the
parameters.
Press DVD PICTURE during
playback.
The current setting appears on
the TV screen.
NORMAL: Select this normally.
CINEMA: Suitable for movie.
USER 1/USER 2: You can adjust parameters that affect
picture appearance and store settings. Go
to step 3.
Press we repeatedly to
select “USER 1” or “USER 2”.
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
USER 1
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
0
GAMMA:
(–3 to +3)
Controls brightness of neutral tints while
maintaining brightness of dark and bright
portions.
BRIGHTNESS:
(–8 to +8)
Controls screen brightness.
CONTRAST:
(–7 to +7)
Controls screen contrast.
SATURATION:
(–7 to +7)
Controls screen color depth.
TINT:
(–7 to +7)
Controls screen tint.
SHARPNESS:
(–8 to +8)
Controls screen sharpness.
0
GAMMA
0
GAMMA
XVC27UM_08DVD.fm Page 45 Monday, June 14, 2004 4:22 PM